HyperX Cloud Stinger Core Wireless PS5 Setup Guide

By High Quality Gaming Gear —— HyperX ROW | Published: 2026-10-24

Category: How-to Guides

Learn how to pair and use your HyperX Cloud Stinger Core Wireless headset with PS5 and PS4. Step-by-step instructions, common mistakes, and troubleshooting tips.

Quick Answer

To set up your HyperX Cloud Stinger Core Wireless on PS5 or PS4, simply plug the included USB receiver into the console, power on the headset, and select the correct audio output in system settings. The process takes less than two minutes.

What You Need Before Starting

The HyperX Cloud Stinger Core Wireless uses a USB-A wireless receiver. On PS5, use the front USB-A port or the rear port on the back of the console. On PS4, any available USB port works. The headset charges via USB-C, so have a cable ready if the battery is low. The headset is compatible out of the box—no additional software or drivers are required.

Common Pairing Pitfalls

The headset and receiver are pre-paired at the factory. If you experience no sound, the most common cause is selecting the wrong audio output device in the PS5 or PS4 system menu. Another frequent issue is the headset being powered off—hold the power button for about 3 seconds until the LED lights up. If you still get no audio, try plugging the receiver into a different USB port and restarting the console.

Step-by-Step Setup Guide

Plug in the USB receiver: Insert the included USB wireless receiver into a USB-A port on your PS5 or PS4. Use the front port on PS5 for easiest access. Avoid using USB hubs—plug directly into the console to prevent connection drops.
Power on the headset: Press and hold the power button on the left earcup for about 3 seconds. The LED indicator will turn solid blue when the headset is on and connected. If the LED blinks slowly, the headset is in pairing mode but not connected—try reinserting the receiver.
Set audio output on PS5: Go to Settings > Sound > Audio Output. Under Output Device, select 'USB Headset (HyperX Cloud Stinger Core Wireless)'. Set Output to Headphones to 'All Audio'. On PS4, go to Settings > Devices > Audio Devices > Output Device and select the same USB headset option.
Adjust microphone settings: In the same Audio Devices menu, set Input Device to 'USB Headset (HyperX Cloud Stinger Core Wireless)'. Adjust microphone level if needed—default is usually fine. If teammates can't hear you, check that the mic is not muted (the mute switch is on the left earcup) and that the input device is correctly selected.
Test and enjoy: Launch any game or media app and confirm audio plays through the headset. Use the volume wheel on the right earcup to adjust game volume. If audio is too quiet, check that the console volume is turned up and that the headset volume wheel is not at minimum.

Product Highlight

HyperX Cloud Stinger Core - Wireless Gaming Headset - PS5-PS4: The wireless HyperX Cloud Stinger Core is a lightweight, durable headset that's ready to play on PS4 and PS5 systems. You don't need any adapters or extra cables—just plug the USB receiver into your console and start playing.
HyperX Cloud Stinger Core - Wireless Gaming Headset - PS5-PS4