How to Clean and Maintain HyperX Cloud Earbuds III

By High Quality Gaming Gear —— HyperX ROW | Published: 2026-10-18

Category: Tips & Care

Keep your HyperX Cloud Earbuds III performing like new with this simple cleaning and maintenance guide. Learn the right tools, step-by-step care, and what to avoid.

Quick answer

Clean your HyperX Cloud Earbuds III every two weeks by gently removing ear tips, wiping the mesh with a dry soft cloth, and using a dry toothpick or soft brush for the speaker grille. Never use liquids directly on the earbuds or insert sharp objects into the sound port.

Why regular cleaning matters for gaming earbuds

Earwax, dust, and moisture naturally build up on in-ear headphones, especially during long gaming sessions. That buildup can muffle sound, reduce bass response, and even cause the omnidirectional microphone to pick up less clearly. For the HyperX Cloud Earbuds III, with their HyperX-tuned 14mm drivers, keeping the mesh and ear tips clear ensures you hear every footstep and explosion without distortion.

What you need and what to avoid

Grab a dry microfiber cloth, a clean dry toothbrush (soft bristles), and a wooden toothpick. Optional: a small bowl of mild soapy water for the silicone ear tips only. Never use alcohol wipes, hydrogen peroxide, or any liquid spray directly on the earbud body or the speaker mesh. These can damage the driver coating and the omnidirectional microphone's internal components. Avoid compressed air cans—they can push debris deeper into the sound port.

Step-by-step cleaning routine

Remove and wash the ear tips: Gently pull the silicone ear tips off the nozzle. Soak them in warm, mild soapy water for a few minutes, then rinse and let them air dry completely before reattaching. Common mistake: putting ear tips back on while damp can trap moisture and cause sound distortion.
Clean the speaker mesh and nozzle: Use a dry soft-bristle toothbrush to lightly brush away any debris from the mesh. For stubborn earwax in the nozzle opening, carefully use a wooden toothpick to scoop it out—never push inward. Checkpoint: if you see debris inside the nozzle, stop and use a gentle brush instead of a toothpick to avoid damaging the driver.
Wipe the earbud body and cable: Dampen a microfiber cloth with a tiny amount of water (wring it out first) and wipe the plastic housing and cable. Avoid the microphone opening and the driver mesh. Let everything air dry for 10 minutes before use. Common mistake: using a soaking wet cloth can send moisture into the omnidirectional mic port, muffling voice pickup.
Store properly between sessions: Always place the earbuds in a clean, dry case or pouch. Avoid tossing them loose into a bag or pocket where lint and dust can clog the mesh. Verdict: proper storage doubles the time between deep cleans and prevents unnecessary wear on the cable and ear tips.

Product fact

HyperX Cloud Earbuds III: Cloud Earbuds III come with ear tips in sizes XS to L, and HyperX-tuned 14mm drivers deliver immersive sound without an additional sound card. The range of ear tip sizes lets you find a secure seal that stays comfortable during marathon sessions, while the 14mm drivers need a clean mesh to deliver clear, zero-lag audio.